Entering additional equipment inspection information

To enter additional equipment inspection information:

  1. Open the Monitored Equipment form.
  2. Select the equipment, profile, or equipment category for which to enter additional equipment inspection information, and then click the Equipment Details tab.
  3. Piping Class—Enter the piping class of the equipment as necessary. The system automatically populates Piping Class Rev., Material Standard, Corr. Allowance, Material, Material Std. Rev., Design Code, Design Temp. Min., and Design Temp. Max.
  4. Material Standard—Enter the material standard of the equipment as necessary.
  5. Nominal OD—Enter a numeric value for the pipe’s nominal outer diameter. Then, specify the unit of measure for the diameter by selecting Inch or mm (millimeters).
  6. MAOP through Lining/Coating—Enter the relevant values according to the design specifications listed by the manufacturer or international standards organizations.
  7. Variable 1 through Text 5—Enter any additional information about the object.
  8. Click Save Record.
    Note: You cannot delete equipment details records that are indirectly associated via the equipment’s category with the monitored data object. If the existing equipment details record is not directly associated with the monitored data object, click Copy Category Data to Equipment to directly associate the equipment details record from the details of the indirectly associated equipment details record.