GIS parameters
GIS functionality is a feature of Infor EAM only. All of the parameters listed in this section are used only by Infor EAM for GIS Integration. You cannot integrate GIS with Infor EAM (Oracle Forms).
Set values for GIS parameters according to the following table. For more information on setting values for parameters, see Defining installation parameters.
| Code | Example | Description | Fixed |
|---|---|---|---|
GISABLC |
3 | This code identifies the maximum number of advanced buffer layers allowed. The default is 3. | No |
GISADDR |
Streets | Name of the Address Layer in the Image Service setup in the GISSERV install parameter. | No |
GISAIMSP |
SHAPEFILE | This code indicates the ArcIMS platform. Acceptable values are SHAPEFILE and SDE. | No |
GISAIMSV |
9.0 | This code indicates the ArcIMS version. Acceptable values are 4.01 and 9.0. | No |
GISCCCOL |
This code indicates the name of the City or Zone Column in the attributes of the City or Zone Layer. This parameter is used when a user searches by specifying the City or Zone name only. | No | |
GISCITY |
This code indicates the name of the City or Zone Layer in the Image Service setup as the GISSERV install parameter. This parameter is used when a user searches by specifying the Zone name only. | No | |
GISCONTP |
TCP | Type of GIS connection. This code indicates the connection type between the Infor EAM application server and the ArcIMS server. Valid values are TCP, HTTP, or HTTPS. If no value is specified, a TCP connection is assumed. | No |
GISCTCOL |
This code indicates the name of the Zone Column in Attributes of the Address Layer. | No | |
GISDREL |
L | Indicates the manner in which the system
should display boundary labels for linear equipment (referred to as "routes" in
GIS). Valid values are
L,
N, and
A. The default is
L. If set to
L, the system displays boundary labels for the
longest path (in the event of multiple route paths).
If set to N, the system displays no boundary labels. If set to A, the system displays boundary labels for all paths (in the event of multiple route paths). |
No |
GISEQUIP |
Hydrant | Default equipment layer name. This code indicates the name of the Asset Layer in the Image Service setup in the GISSERV install parameter. | No |
GISGEOSV |
WATER_AXL2, WATER_AXL3 | This code indicates the name of the secondary Image Service setup on the ArcIMS server. See the explanation of the GISSERV parameter later in this section for the default Image Service setup. Separate values with a comma to enter multiple geocode services, e.g., Service2, Service3, Service4. | No |
GISGMAXC |
100 | This code indicates the maximum number of geocoding match candidates. The default is 100. | No |
GISGMIN |
20,0,100 | This code indicates the minimum geocoding score that the system should display in the Matching Addressess popup. The default is 20. Separate multiple geocoding score values with a comma. The first value listed is the score for GISSERV and subsequent entries are values for each GISGEOSV. | No |
GISHOST |
gisone | GIS server name. This code indicates the host name (and domain if required) of the machine running arcIMS. The URL must be accessible from the Infor EAM server. Do not include http:// in the URL. | No |
GISINTRS |
& | @ | Intersection address searching symbols (default & | @). Values should be separated by a space. | No |
GISLNCOL |
0,255,197 | GIS line RGB color (default 0,255,197). This code indicates the color used for lines in the GIS map by entering an RGB color of 0 to 255. | No |
GISLNWID |
4 | Specify the width of highlighted lines in
the GIS map, or enter
LAYERDEFINED.
Note: For more information about the
LAYERDEFINED value, see
"Customizing Map Symbols" Chapter 10
GIS Integration of the
Infor EAM User's
Guide.
|
No |
GISMAPS |
Global | Set to Global to display a single map in Infor EAMbased on GIS installation parameters. Set to Organization to display maps based on Organization. Set to Department to display maps based on Department. Department Security must be enabled when set to Department. | No |
GISNARAD |
1500 | Specify the radius, in meters, used for viewing nearest address. The default value is 1500. | No |
GISMLCOL |
255,55,155 | GIS markup line RGB color (default 255,55,155) | No |
GISMLWID |
4 | GIS markup line width (default 4) | No |
GISMPCOL |
255,55,155 | GIS markup point RGB color (default 255,55,155) | No |
GISMPTYP |
CROSS | Specify the type of the markup point.
Acceptable values are
CIRCLE,
STAR,CROSS,
SQUARE,
TRIANGLE, or
RASTERMARKER.
Note: For more information about the
RASTERMARKER value, see
"Customizing Map Symbols."
|
No |
GISMPWID |
15 | GIS markup point width (default 15) | No |
GISOVSV |
WATER_AXL_OV | Specify the image displayed within the overview map. The default is the default extent of the current map. | No |
GISOVSZ |
25 | Specify the size of the overview map. The number you enter represents a percentage of the width of the current map. The default is 25. | No |
GISPLYBC |
255,0,0 | GIS polygon boundary RGB color (default 255,0,0). This code indicates the color used for the boundary of highlighted polygons in the GIS map by entering an RGB color of 0 to 255. | No |
GISPLYCL |
0,255,197 | GIS polygon fill RGB color (default 0,255,197). This code indicates the fill color used for highlighted polygons in the GIS map by entering an RGB color of 0 to 255. | No |
GISPLYFT |
CROSS | GIS polygon fill type. This code indicates the fill type of highlighted polygons in the GIS map. Valid values are HORIZONTAL, , BDIAGONAL, CROSS, DIAGCROSS, FDIAGONAL, or VERTICAL. | No |
GISPLYTR |
1 | GIS polygon fill transparency (default 1.0). This code indicates the transparency level of the color fill of highlighted polygons in the GIS map. | No |
GISPORT |
5300 | GIS server port. This code indicates the port number on which the ArcIMS service mentioned in the GISSERV install parameter is accessed. | No |
GISPTCOL |
0,255,197 | GIS point RGB color (default 0,255,197). This code indicates the color used for points in the GIS map by entering an RGB color of 0 to 255. | No |
GISPTTYP |
CIRCLE | This code indicates the point type in the
GIS map. Valid values are
STAR,
CIRCLE,
CROSS,
SQUARE,
TRIANGLE,
RASTERMARKER, or
LAYERDEFINED.
Note: For more information about the
RASTERMARKER and
LAYERDEFINED values, see
"Customizing Map Symbols."
|
No |
GISPTWID |
15 | GIS point width (default 15). This code indicates the width of the point used in the GIS map. | No |
GISSERV |
WATER_AXL1 | This code indicates the name of the primary Image Service setup on the ArcIMS server. | No |
GISSFCLR |
248,138,29 | This code indicates the selected feature highlight color (default 248,138,29). | No |
GISSTCOL |
This code indicates the name of the Street Column in Attributes of the Address Layer that is used for non-geocoded address searches. | No | |
GISSVAXL |
GIS map file for service identified by
GISSERV. Used for viewing nearest address,
e.g., reverse geocoding.
Note: GISSVAXL supports
HTTP, fully qualified file paths, and
UNC file paths. The system requires this to
load the
XML of the
AXL and retrieve the geocoding definitions.
Such information is not available via ArcXML responses.
|
No | |
GISTFNTC |
0,0,0 | Specify the RGB font color of the text marker label. Default values are 0,0,0. | No |
GISTFNTS |
BOLD | This code indicates the font style of the text marker. Valid values are BOLD, BOLDITALIC, ITALIC, REGULAR, OUTLINE, or UNDERLINE. | No |
GISTFNTZ |
10 | This code indicates the font size of the text marker label. The default value is 10. | No |
GISTFONT |
Arial | This code indicates the font of the text marker label. The default value is Arial. | No |
GISTGCLR |
255,255,125 | This code indicates the RGB color with which to highlight the text marker label. Default values are 255,255,125. | No |
GISTLPCL |
0,0,0 | This code indicates the RGB point color of the text label. Default values are 0,0,0. | No |
GISTLPTP |
CIRCLE | This code indicates the point type of the
text label. Valid values are
CIRCLE (default),
STAR,
CROSS,
SQUARE,
TRIANGLE, or
RASTERMARKER.
Note: For more information about the
RASTERMARKER value, see
"Customizing Map Symbols."
|
No |
GISTLPWD |
15 | This code indicates the width of the point used in the text label. | No |
GISTOCLR |
255,255,0 | This code indicates the RGB color with which to outline the text marker label. Default values are 255,255,0. | No |
GISTPRMD |
ALLUPPER | This code indicates the print mode for the text marker. Valid values are ALLUPPER, ALLLOWER, NONE, or TITLECAPS. | No |
GISZOFCT |
2 | This code indicates the default percentage factor by which the map search result will be enlarged. The default value is 2. | No |
URLGIS |
http://shotgundemo. inforEAM.net/ attachments/giswo/default/ | GIS map PDF directory. This value is used when displaying and printing map attachments of the work order. | No |