Entering route inspection results

Enter the results of the inspection into the system after the employee performs the inspection.

Follow these steps to enter route inspection results.

  1. Choose Inspect > Route Inspection.The system displays the Route Inspection form.
  2. Select the work order for which to enter inspection results, and then click the Inspection Results tab. The system displays the Inspection Results page.
  3. Click Delete Record. The system displays the Inspection.
    Note: If you linked custom prompt fields with Inspection Result fields and entered a value for Aspect, the system displays the prompt fields on the last Inspection Result page.
  4. Equip—Enter the equipment for which to enter inspection results.
    Note: The Equip lookup displays data that is in the organizations for which you have access permission.
  5. Aspect—Enter the aspect to associate with this equipment.
  6. PType—Enter the point type to associate with the equipment.
  7. Point—Enter the point to associate with the equipment.
  8. Choose one or both of the following options:
    • The inspection result is qualitative—For Find, enter the finding that relates to the inspection, or enter a Cmnt.
    • The inspection result is quantitative—For Value, enter the inspection result.
  9. Method—Enter the method of inspection for the selected inspection aspect.
  10. Result—Select the reliability code for the inspection (this code is also used in regression analysis). Choose one of the following options:
    • The measurement is acceptable—Select Valid.
    • The measurement is wrong—Select Invalid.
    • The inspection point has been changed so drastically that all previous inspection results for this point must be deactivated—Select Discontinuity.
  11. Rating—Select the confidence rating for the inspection results. Define confidence ratings on the Codes page of the Entities form (BNENTS) for the CRAT entity in Infor EAM.
  12. Completed—Select to indicate that the inspection is complete.
  13. Slope—Enter the slope for the inspection results.
  14. Loc—Enter the location at which the inspection was performed.
  15. Cmnt—Enter any additional information about the inspection results.
  16. Insptr—Enter the person conducting the inspection.
  17. StdWO—Enter either an existing standard work order or a PM schedule. The system generates the work order when the inspection results reach the critical value or tolerance.
  18. New WO Required—Select to indicate that a new work order is required.
  19. Click Delete Record. The system displays a confirmation message.
  20. Click Yes. The system adds the inspection results.